Barco BARCOREALITY SIM 6 ULTRA R9040150 Owner's Manual page 44

5. Random Access
How to install the correct settings for the options in the Edit file menu.
EDIT FILE OPTIONS
Source number
Clamp delay
Clamp width
Field polarity
Select with ↑ or ↓
<ENTER> to toggle
↑ or ↓ to change value
<EXIT> to return
Menu 5-11
Source number
Clamp delay
Clamp width
Sync
pulse
Clamp
pulse
Image 5-1
Example for Clamp position [trailing]
Field polarity
40
1
0
10
[pos]
The source number of a non-active source can be changed to any other source number. This makes
it possible to create a file for future source numbers.
The time between the leading edge of the clamp pulse and the locked edge of the sync pulse. Can be
any value between 0 and 255. Change the value by pushing the cursor key ↑ or ↓.
The width of the clamp pulse can be any value between 0 and 255. Change the value by pushing
the cursor key ↑ or ↓.
Clamp Clamp
delay width
The field polarity function is used for interlaced images. Both rasters of the image could be shifted in a
wrong way (double lines are visible in the image). This can be corrected by forcing the field polarity to
[neg] or [pos]. Use the ENTER key to toggle between [pos] and [neg].
R5976420 BARCOREALITY SIM 6 ULTRA 14052003