3. Connections
How to connect to Input 1?
1. Connect the Output of the Image Generator to the 5–Cable BNC Input (Input 1) on the projector. (image 3-5)
VIDEO
R
G
Image 3-5
Connecting to Input 1
How to select Input 1?
1. Press key 1 on the RCU or the local keypad.
Configuring the 5 cable input
This configuration has to be done on the Input Slot menu. To change the signal format:
1. Press the ADJUST or ENTER key to start up the Adjustment mode.
The Adjustment Mode menu will be displayed. (menu 3-8)
2. Push the cursor key ↑ or ↓ to highlight Installation. (menu 3-9)
3. Press ENTER to select.
The Installation will be displayed.
4. Push the cursor key ↑ or ↓ to to highlight Input Slots. (menu 3-10)
5. Press ENTER to select.
The projector will scan the inputs and will display the results in the Input Slots menu. (menu 3-11)
6. Push the cursor key ↑ or ↓ to select the first slot. (menu 3-12)
18
3
4
S-VIDEO
SDI
5
IEEE 1394
SDO
1
COMPUTER
B
H/C
V
6
10/100 Base-T
RS232 IN
MOUSE
2
MONITOR
AUDIO IN
A
AUDIO IN
Image Generator
R5976420 BARCOREALITY SIM 6 ULTRA 14052003
RC
RS232 OUT
COMM. PORT
B
AUDIO IN
C
AUDIO IN