Projector Address; Common Address - Barco BARCOREALITY SIM 6 ULTRA R9040150 Owner's Manual

7. Service Mode
7.6.2

Projector Address

How to change the Projector Address?
1. Push the cursor key ↑ or ↓ to highlight Projector Address. (menu 7-13)
2. Press ENTER to select.
The actual address is filled in.
The first digit is highlighted.
CHANGE PROJ. ADDRESS
Projector address :
Common address (RC5) :
Common address (PPM) : 0
Select with ↑ or ↓
then <ENTER>
Reprogram with ↑,↓,←,→
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 7-13
How to enter the new projector address?
1. Enter the digits with the digit keys on the RCU or local keypad.
Or,
push the cursor keys ← or → to select a digit and change the value by pushing the cursor key ↑ or ↓ until the new value is reached.
Continue with the other digits on the same way. The individual address must be between 0 and 255.
7.6.3

Common Address

How to change a Common Address?
1. Push the cursor key ↑ or ↓ to highlight the active Common Address e.g. (RC5). (menu 7-14)
2. Press ENTER to select.
CHANGE PROJ. ADDRESS
Projector address :
Common address (RC5) :
Common address (PPM) : 0
Select with ↑ or ↓
then <ENTER>
Reprogram with ↑,↓,←,→
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 7-14
Entering the new common address
1. Enter with the digit keys on the RCU or the local keypad
Or,
pushing the cursor key ↑ or ↓ until the new value is reached.
Only addresses between 0 and 1 are valid.
122
1
0
1
0
R5976420 BARCOREALITY SIM 6 ULTRA 14052003