Input 2 - Barco BARCOREALITY SIM 6 ULTRA R9040150 Owner's Manual

7. Press ENTER to toggle the signal priority.
8. Press EXIT several times to leave the adjustment mode.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 3-8
INPUT SLOTS
SLOT SELECTOR [AUTOMATIC]
x 1. RGB [HS&VS]
- 2. RGB [HS&VS]
- 3. NO MODULE
- 4. NO MODULE
- 5. NO MODULE
- 6. NO MODULE
Select with ↑ or ↓
<ENTER> to toggle
<EXIT> to return
Menu 3-12
Possible indications on the input slot menu.
• RGB [HS&VS] = RGB analog signals, separate sync is horizontal and vertical sync
• RGB CS = RGB analog signals, separate sync is composite sync
• RGB CV = RGB analog signals, separate sync is composite video or tri-level sync
• RGB-SOG = RGB analog signals, sync on green is composite sync
1
• VIDEO
1
• S-VIDEO
When using an RCVDS 05 with a 5–Cable Output Module, connect these 5 cables to this 5-Cable Input Slot
(Input Slot 1) of the projector. All sources of the RCVDS can now be accepted by the projector.
3.6.5

Input 2

How to connect a Computer to the Projector?
1. Connect the output of the graphical card of the computer to the Computer input of the projector (image 3-6)
Note: Only if the connection is < 60 cm. Otherwise insert an interface between the output of the computer and the input of the
projector.
R5976420 BARCOREALITY SIM 6 ULTRA 14052003
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 3-9
INSTALLATION
INPUT SLOTS
NO SIGNAL
BARCO LOGO
LENS
MENU POSITION[CENTER]
800 PERIPHERAL
MORE ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 3-10
3. Connections
INPUT SLOTS
SLOT SELECTOR [AUTOMATIC]
x 1. RGB [HS&VS]
- 2. RGB [HS&VS]
- 3. NO MODULE
- 4. NO MODULE
- 5. NO MODULE
- 6. NO MODULE
Select with ↑ or ↓
<ENTER> to toggle
<EXIT> to return
Menu 3-11
19