4. Getting started
4.5 Using the RCU
Pointing to the reflective screen
1. Point the front of the RCU to the reflective screen surface. (image 4-4)
Ceiling
Screen
Image 4-4
Pointing the RCU via the screen to the IR sensor
Hardwired Remote Input
1. Plug one end of the remote cable in the connector on the bottom of the RCU.
2. Plug the other end in the connector in the front panel of the projector labelled RC. (image 4-5)
28
IR sensor
RCU
R5976420 BARCOREALITY SIM 6 ULTRA 14052003