Lens Adjustment - Barco BARCOREALITY SIM 6 ULTRA R9040150 Owner's Manual

6.7 Lens Adjustment

What can be done ?
All lens adjustments are motorized and can be adjusted with the RCU.
The following items can be adjusted:
• zoom/focus
• shift
If the "Rugged" option is installed the * key will display a WARNING message.
WARNING
LENS-LOCKING
IS ACTIVATED
ADJUSTING THE LENS
MAY DAMAGE THE
PROJECTOR
PRESS * TO ADJUST
<EXIT> to return
Menu 6-13
Zoom/Focus adjustment of the lens
1. Push the cursor key ↑ or ↓ to highlight Lens. (menu 6-14)
2. Press ENTER to select.
The adjustment pattern will be displayed.
With the TEXT key it is possible to toggle between the internal adjustment pattern or the connected source.
3. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image.
Note: The zoom/focus function is only applied when a motorized zoom lens is mounted.
4. When finished, press EXIT to return to the installation menu or press ENTER to go to the shift function.
INSTALLATION
INPUT SLOTS
NO SIGNAL
BARCO LOGO
LENS
MENU POSITION[CENTER]
800 PERIPHERAL
MORE ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-14
R5976420 BARCOREALITY SIM 6 ULTRA 14052003
6. Installation Mode
111