Table of Contents
Advertisement
How to change the password ?
1. Push the cursor key ↑ or ↓ to highlight Change Password. (menu 7-9)
2. Press ENTER to display the Change Password menu. (menu 7-10)
4 '_' characters are displayed. A new password can be entered with the digit keys of the RCU or local keypad. Every time a digit
is entered, a 'X' appears on the screen. The confirm new password is still grayed out.
3. Press ENTER, the confirm new password item becomes active. Press EXIT if no changes have to be made.
4. 4 'x' characters are displayed in the confirm new password area. Key in your password again with the digit keys of the RCU or
the local keypad.
5. Press ENTER to select.
If the confirm new password entry is the same as the entered new password, the password is changed.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ.ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
I2C DIAGNOSIS
DIMMING
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-9
7.6 Change the address
What can be changed?
Within the Change password address item, the following items can be changed:
•
projector address
•
common address
7.6.1
Start up
How to change the address ?
1. Push the cursor key ↑ or ↓ to highlight Change Proj. Address. (menu 7-11)
2. Press ENTER to select.
The Change Projector Address menu will be displayed. (menu 7-12)
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ.ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
I2C DIAGNOSIS
DIMMING
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-11
R5976420 BARCOREALITY SIM 6 ULTRA 14052003
CHANGE PASSWORD
Enter new password
_ _ _ _
Confirm new password
_ _ _ _
Select with ↑ or ↓
Reprogram with
numeric keys
then <ENTER>
<EXIT> to return
Menu 7-10
CHANGE PROJ. ADDRESS
Projector address :
1
Common address (RC5) :
0
Common address (PPM) : 0
Select with ↑ or ↓
then <ENTER>
Reprogram with ↑,↓,←,→
or numeric keys
<ENTER> to confirm
<EXIT> to return
Menu 7-12
7. Service Mode
121
Advertisement
Table of Contents
