No Signal - Barco BARCOREALITY SIM 6 ULTRA R9040150 Owner's Manual

6. Installation Mode
The black indicated inputs are selectable and changeable. The gray indicated inputs are fix inputs and are not
changeable.
The indication in front of the digit means :
x : valid signal connected to the input.
- : no valid signal connected to the input.
No module: the option is not installed
How to change the Slot Selector ?
1. Push the cursor key ↑ or ↓ to highlight Slot Selector.
2. Press ENTER to toggle between [AUTOMATIC] and [MANUAL].
Note: The default setting for the Slot Selector is [AUTOMATIC].
[AUTOMATIC]
[MANUAL]
Possible results for the input slots
Source
RGB analog
Component Video
What if a switcher is connected to the projector ?
If a RCVDS (switched on) or VS05 is connected to the projector, it will be also indicated on the menu by adding +800 peripheral.
If no 800 peripheral indication is made on the menu, there are still two possibilities, no RCVDS or VS05 connected or RCVDS is
switched off.
When a 800 peripheral is connected to the projector, the input slots are not accessible with the cursor key to toggle their function.

6.5 No signal

Overview
• Changing the background color
• Changing the shutdown setting
• Changing the shutdown time
108
The projector will scan the inputs one by one, if one source is found, this source will be projected, if
different sources are found the priority is as follow (Slot 1: 5 Cable input, Slot 2: Computer).
The user will select the desired input.
Indication
RGB-CV : separate sync is composite video on H/C input
RGB-HS&VS: separate sync is horizontal and vertical sync
RGB-CS : separate sync is composite sync
RGB-SOG : sync on green
Component video
R5976420 BARCOREALITY SIM 6 ULTRA 14052003