Menu Position; Peripheral - Barco BARCOREALITY SIM 6 ULTRA R9040150 Owner's Manual

6. Installation Mode
Shift adjustment of the lens
1. Push the cursor key ↑ or ↓ to highlight Lens. (menu 6-15)
2. Press ENTER to select.
The adjustment pattern will be displayed.
With the TEXT key it is possible to toggle between the internal adjustment pattern or the connected source.
3. Push the cursor key ↑ or ↓ to shift the image up and down and ← or → to shift the image left or right.
Note: The lens can be shifted in a range of :
vertical shift : - 2 mm to + 20 mm
horizontal shift : - 5 mm to + 5 mm
4. When finished, press EXIT to return to the installation menu or press ENTER to go to the zoom/focus function.
INSTALLATION
INPUT SLOTS
NO SIGNAL
BARCO LOGO
LENS
MENU POSITION[CENTER]

800 PERIPHERAL

MORE ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-15

6.8 Menu Position

What can be done ?
The Menu position can be changed from bottom right to the center of the image.
How to change the Menu Position?
1. Push the cursor key ↑ or ↓ to highlight Menu Position. (menu 6-16)
2. Press ENTER to toggle between and [CENTER] and [EDGES].
[EDGES]
[CENTER]
INSTALLATION
INPUT SLOTS
NO SIGNAL
BARCO LOGO
LENS
MENU POSITION[CENTER]
800 PERIPHERAL
MORE ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-16
6.9 800 Peripheral
Overview
• Defining the Output module of the RCVDS05
• Defining the communication protocol of the RCVDS05
112
The Menu will always be displayed in the bottom right corner.
The Menu will always be in the middle of the image.
R5976420 BARCOREALITY SIM 6 ULTRA 14052003