Load File - Barco BARCOREALITY SIM 6 ULTRA R9040150 Owner's Manual

5.3.4

Load File

Start up Load file
To start up the load file, handle as follow :
1. Push the cursor key ↑ or ↓ to highlight Load. (menu 5-4)
2. Press ENTER to select.
The Load menu displays the corresponding files depending on the installed filter. (menu 5-5)
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 5-4
Changing the filter setting
1. Push the cursor key ↑ or ↓ to to highlight filter list.
2. Press ENTER to toggle the annotation between brackets.
[ALL] all files that can be loaded will be displayed
[FIT] only the best fitting files will be displayed (with a distinction of ± 2 lines and line duration of ± 300 ns, if nothing
is found within this small area, the projector continues searching until it finds something).
How to load a file ?
1. Push the cursor key ↑ or ↓ to select the best fitting file. (menu 5-6)
2. Press ENTER to select.
A confirm Load file menu will be displayed with the newly created file and the one on which the new file is based on. (menu 5-7)
3. Press ENTER to confirm the new creation or EXIT to return to the load file menu.
LOAD FILE
FILTER LIST [All]
Filename Scr resolution
xga_60.s01 1 1024x768
xga_60.c01 1 1024x760
xga_60.c02 1 1024x760
xga_60.c03 1 1024x760
----------------------------
Active file : xga_60.c04
Select with ↑ or ↓ , →
<ENTER> to accept
<EXIT> to return
Menu 5-6
During a load file, the actual file is displayed next to the indication Active file.
When scrolling through the files, the image will be adapted according to the settings of the selected file ( on
line adaptation ) .
The image is not perfect ?
If the displayed image is not correct after selecting the best fitting file, go to the Edit menu, select the active file and change the File
settings.
R5976420 BARCOREALITY SIM 6 ULTRA 14052003
LOAD FILE
FILTER LIST [All]
Filename Scr resolution
xga_60.s01 1 1024x768
xga_60.c01 1 1024x760
xga_60.c02 1 1024x760
xga_60.c03 1 1024x760
----------------------------
Active file : xga_60.c04
Select with ↑ or ↓ , →
<ENTER> to accept
<EXIT> to return
Menu 5-5
CONFIRM
LOAD FILE
create file
xga_60.c02
based on file
xga_60.s01?
<ENTER> to return
<EXIT> to return
Menu 5-7
5. Random Access
37