Corner Adjustment - Barco BARCOREALITY SIM 6 ULTRA R9040150 Owner's Manual

How to select the Corners ?
1. Push the cursor key ↑ or ↓ to highlight the Coarse selection. (menu 5-59)
2. By default corner is already selected, if not, press ENTER until corner is displayed.
3. Push the cursor key ← or → to select the desired Corner.
The COL & ROW (Column and Rows) indicator
box will be displayed on the screen. (image 5-17)
GEOMETRY DISTORTION
corner left top
col = 0
row = 0
pixels x = 0
y = 0
subpixels x = 0
y = 0
Menu 5-59
Image 5-17
Coarse Corner selections

5.5.7.3.3 Corner adjustment

To change a setting, only the method using the arrow keys is mentioned in the following procedures, the
projector will need to recalculate every adjustment step.
For coarse adjustments it is also possible to enter the new value directly with the numeric keys on the RCU
or local keypad.
What is Pixel and Subpixel adjustment ?
Pixel Coarse adjustment, this will shift the Corner in steps of 1 pixel
Subpixel Fine tuning adjustment, this will shift the Corner in steps of 1/32 of a pixel
COL ROW
4. This & indicates the position of the selected grid point within the 81 zones.
R5976420 BARCOREALITY SIM 6 ULTRA 14052003
4
will show the corresponding position of the selected Corner and an indication
5. Random Access
63