2. RS232 Commands
2.152 Lamp Runtime, Read
C
AUTION
Description
Read the lamp runtime in hours.
Command
Command [0]
Return Data
The return data-transfer being the lamp runtime in hours consists of four data bytes. The first byte is the most significant byte!
Lamp Runtime (hours) = Data[0] x 256³ + Data[1] x 256² + Data[2] x 256 + Data[3]
Example
Read the lamp runtime of a projector with address \x01. Suppose the lamp runtime is 100 hours.
Transmit
Start
Projector Address
Command [0]
Checksum
Stop
Receive (Acknowledge)
Start
Projector Address
Command [0]
Command [1]
Checksum
Stop
Receive (Answer)
Start
Projector Address
Command [0]
Return Data [0]
Return Data [1]
Return Data [2]
Return Data [3]
204
:
This command is NOT applicable on the SIM6 Ultra II series projectors.
\x64
\xfe
\x01
\x64
\x65
\xff
\xfe
\x01
\x00
\x06
\x07
\xff
\xfe
\x01
\x64
\x00
\x00
\x00
\x64
R5976538 BARCOREALITY SIM6 ULTRA SERIES 08/06/2005