Infrared Ports, Read - Barco BarcoReality SIM6 Ultra R9040150 User Manual

2.127 Infrared Ports, Read

Description
Read the status of the infrared ports.
Command
Command [0]
Return Data
Data [0] = Status
bit #
bit 0 (LSB)
bit 1
bit 2
Example
Read the status of the infrared ports of a projector with address \x01. Suppose a hardwired remote is used and the front and rear
receiver are enabled.
Transmit
Start
Projector Address
Command [0]
Checksum
Stop
Receive (Acknowledge)
Start
Projector Address
Command [0]
Command [1]
Checksum
Stop
Receive (Answer)
Start
Projector Address
Command [0]
Data [0]
Checksum
Stop
5. When no hardwired remote is connected, bit 0 and bit 1 indicate the previous state of the corresponding receivers (In reality, they are enabled).
R5976538 BARCOREALITY SIM6 ULTRA SERIES 08/06/2005
\x6f
bit = 0
Receiver front disabled
Receiver rear disabled
5
No hardwired remote
\xfe
\x01
\x6f
\x70
\xff
\xfe
\x01
\x00
\x06
\x07
\xff
\xfe
\x01
\x6f
\x07
\x77
\xff
2. RS232 Commands
bit = 1
Receiver front enabled
Receiver rear enabled
Hardwired remote
175