Infrared Ports, Write - Barco BarcoReality SIM6 Ultra R9040150 User Manual

2. RS232 Commands

2.128 Infrared Ports, Write

Description
Enable/Disable one ore more infrared ports.
Command
Command [0]
Data
Data [0] = Status
bit #
bit 0 (LSB)
bit 1
when no hardwired remote is connected, the receiver front and rear cannot be disabled, so bit 0 and bit 1 will
take effect after a hardwired remote has been connected.
Example
Enable the front and rear receiver of a projector with address \x01.
Transmit
Start
Projector Address
Command [0]
Data [0]
Checksum
Stop
Receive (Acknowledge)
Start
Projector Address
Command [0]
Command [1]
Checksum
Stop
176
\x6e
bit = 0
Disable receiver front
Disable receiver rear
\xfe
\x01
\x6e
\x03
\x72
\xff
\xfe
\x01
\x00
\x06
\x07
\xff
R5976538 BARCOREALITY SIM6 ULTRA SERIES 08/06/2005
bit = 1
Enable receiver front
Enable receiver rear