Orientation (Configuration), Write - Barco BarcoReality SIM6 Ultra R9040150 User Manual

2.186 Orientation (Configuration), Write

Description
Write the orientation (configuration) to the projector.
Command
Command [0]
Command [1]
Data
Data [0]
Example
Set the Orientation (Configuration) of a projector with address \x01 to Front/Ceiling.
Transmit
Start
Projector Address
Command [0]
Command [1]
Data [0]
Checksum
Stop
Receive (Acknowledge)
Start
Projector Address
Command [0]
Command [1]
Checksum
Stop
R5976538 BARCOREALITY SIM6 ULTRA SERIES 08/06/2005
\x20
\x24
Orientation (Configuration):
• \x40 = Front/Table
• \x80 = Front/Ceiling
• \x00 = Rear/Table
• \xc0 = Rear/Table
\xfe
\x01
\x20
\x24
\x80
\x00
\xc5
\xff
\xfe
\x01
\x00
\x06
\x07
\xff
2. RS232 Commands
241