Geometry File, Move - Barco BarcoReality SIM6 Ultra R9040150 User Manual

2.102 Geometry File, Move

Description
Move a selected Geometry File (move file 1 to file 2).
Only USER Geometry Files can be moved.
If the location of file 2 is already occupied, file 2 will overwrite the existing file
If file 1 and file 2 point to the same location, the base name of file 1 is replaced by the base name of file 2,
without affecting other data
Availability (Only for SIM6 series)
From software V2.02 (WARP6 MKII) and V1.01(SIM6 ULTRA HB)
Command
Command [0]
Command [1]
Data
Data [...]
Example
Move the file "t_bowlin.g02" to the file "myfile .g03"
Transmit
Start
Projector Address
Command [0]
Command [1]
Data [0]
Data [1]
Data [2]
Data [3]
Data [4]
Data [5]
Data [6]
Data [7]
Data [8]
Data [9]
Data [10]
Data [11]
Data [12]
Data [13]
Data [14]
Data [15]
R5976538 BARCOREALITY SIM6 ULTRA SERIES 08/06/2005
\xfa
\xbe
"from filename" followed by the "to filename" (no wildcards
allowed)
\xfe
\x01
\xfa
\xbe
\x74
\x5f
\x62
\x6f
\x77
\x6c
\x69
\x6e
\x2e
\x67
\x30
\x32
\x00
\x6d
\x79
\x66
2. RS232 Commands
139