Lamp Runtime Maximum, Read - Barco BarcoReality SIM6 Ultra R9040150 User Manual

2. RS232 Commands

2.149 Lamp Runtime Maximum, Read

Description
Read the maximum lamp runtime in seconds. This is the maximum guaranteed runtime for the lamp.
Command
Command [0]
Command [1]
Return Data
The return data-transfer being the maximum lamp runtime in seconds consists of four data bytes. The first byte is the most significant
byte!
Formula: Maximum lamp runtime (seconds) = Data[0] x 256³ + Data[1] x 256² + Data[2] x 256 + Data[3]
Example
Read the maximum lamp runtime of a projector with address \x01. Suppose the maximum is 1000 hours.
Transmit
Start
Projector Address
Command [0]
Command [1]
Checksum
Stop
Receive (Acknowledge)
Start
Projector Address
Command [0]
Command [1]
Checksum
Stop
Receive (Answer)
Start
Projector Address
Command [0]
Command [1]
Data [0]
Data [1]
Data [2]
198
\x76
\x89
\xfe
\x01
\x76
\x89
\x00
\xff
\xfe
\x01
\x00
\x06
\x07
\xff
\xfe
\x01
\x76
\x89
\x00
\x36
\xee
R5976538 BARCOREALITY SIM6 ULTRA SERIES 08/06/2005