File, Copy - Barco BarcoReality SIM6 Ultra R9040150 User Manual

2.83 File, Copy

Description
Copy File1 to File2.
- File2 (destination file) has to be a custom file.
- If the location specified by the "file index" of File2 has already been taken up, File2 will overwrite that contents.
- If File1 and File2 point to the same location, the base name of File1 is replaced by the base name of File2 without affecting other
data.
Command
Command [0]
Data
From filename followed by the to filename (no wildcards allowed).
Example
Copy the file "ntsc .c01" to "camera1 .c05" on a projector with address \x01.
Transmit
Start
Projector Address
Command [0]
Data [0]
Data [1]
Data [2]
Data [3]
Data [4]
Data [5]
Data [6]
Data [7]
Data [8]
Data [9]
Data [10]
Data [11]
Data [12]
Data [13]
Data [14]
Data [15]
Data [15]
Data [16]
Data [17]
Data [18]
Data [19]
Data [20]
R5976538 BARCOREALITY SIM6 ULTRA SERIES 08/06/2005
\xc2
\xfe
\x01
\xc2
\x6e (='n')
\x74 (='t')
\x73 (='s')
\x63 (='c')
\x20 (=' ')
\x20 (=' ')
\x20 (=' ')
\x20 (=' ')
\x2e (='.')
\x63 (='c')
\x30 (='0')
\x31 (='1')
\x00
\x63 (='c')
\x61 (='a')
\x6d (='m')
\x6d (='m')
\x65 (='e')
\x72 (='r')
\x61 (='a')
\x31 (='1')
\x20 (=' ')
2. RS232 Commands
111