File, Move - Barco BarcoReality SIM6 Ultra R9040150 User Manual

2. RS232 Commands

2.89 File, Move

Description
Move File1 to File2.
Only custom files can be moved.
If the location specified by the "file index" of File2 has already been taken up, File2 will overwrite that contents.
If File1 and File2 point to the same location, the base name of file1 is replaced by the base name of file2 without affecting other data.
Command
Command [0]
Data
From filename followed by the to filename (no wildcards allowed).
Example
Move the file "ntsc .c01" to "camera1 .c05" on a projector with address \x01.
Transmit
Start
Projector Address
Command [0]
Data [0]
Data [1]
Data [2]
Data [3]
Data [4]
Data [5]
Data [6]
Data [7]
Data [8]
Data [9]
Data [10]
Data [11]
Data [12]
Data [13]
Data [14]
Data [15]
Data [15]
Data [16]
Data [17]
Data [18]
Data [19]
Data [20]
122
\xc4
\xfe
\x01
\xc4
\x6e (='n')
\x74 (='t')
\x73 (='s')
\x63 (='c')
\x20 (=' ')
\x20 (=' ')
\x20 (=' ')
\x20 (=' ')
\x2e (='.')
\x63 (='c')
\x30 (='0')
\x31 (='1')
\x00
\x63 (='c')
\x61 (='a')
\x6d (='m')
\x6d (='m')
\x65 (='e')
\x72 (='r')
\x61 (='a')
\x31 (='1')
\x20 (=' ')
R5976538 BARCOREALITY SIM6 ULTRA SERIES 08/06/2005