Runtime Warning - Barco R9040171 Owner's Manual

6. General Menu
Image 6-13
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized technician.

6.8 Runtime warning

What can be done ?
When the lamp has reached a certain predetermined runtime , a warning message will be displayed on the screen. The lamp runtime
warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp
lifetime.
How to set the lamp runtime warning?
1. Press MENU to activate the Toolbar
2. Press → to select the General item
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select Runtime warning (image 6-14)
5. Press ENTER
A dialogbox is displayed (image 6-15)
6. Use ←or →, the numeric keys on the remote, or the keypad to change the runtime warning setting.
Image 6-14
Image 6-15
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized technician.
40 R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002