4. Getting started
indicate the current memorized setting for this source. The bar scale changes as the arrows on the RCU are pressed or the + or -
buttons on the local keypad.
The picture settings are saved in the image file.
Image 4-7
Brightness
Contrast
Color
Tint(Hue)
Sharpness
Phase
Gamma
Freeze
The Pause Key
When the Pause key is pressed, the image projection is stopped, a black screen will be displayed
To restart the image projection:
•
Press PAUSE key
•
Press BACK key
•
Select a source number
4.5.5
Using the menu
Menu Layout
A grey line gives the transition between standard and advanced parameters.
The existence of a submenu is indicated by a white arrow, Settings is a submenu.
Keystone is an item of the Image menu.
Three suspension points indicate that the menuitem hides a dialogbox or a textbox.
28
Use the + button for a higher brightness.
Use the - button for a lower brightness.
Use the + button for a higher contrast.
Use the - button for lower contrast.
Use the + button for richer colors.
Use the - button for lighter colors.
Tint is only active for Video and S-Video when using the NTSC 4.43 or NTSC 3.58 system.
Use the + button
Use the - button.
Use the + button for a sharper picture.
Use the - button for a softer picture.
Use the + or - button to adjust the phase.
Use the + button for a higher gamma
Use the - button for a lower gamma
Press Freeze to freeze the displayed image.
R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002