Connections; Power Connection; Input Source Connection; Input Facilities - Barco R9040171 Owner's Manual

3. CONNECTIONS

Overview
•

Power connection

•

Input Source connection

3.1 Power connection
AC Power cord connection
Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector
at the front of the projector. The power input is auto-ranging from 90 to 240 VAC.
Fuses
For continued protection against fire hazard :
• refer replacement to qualified service personnel.
• ask to replace with the same type of fuse (T10 AH/250V).
3.2 Input Source connection
3.2.1

Input facilities

Overview input facilities
•

5-cable input (BNC1)

• 5-cable Data input (BNC2)
• Composite Video
• S-Video
• SDI: Serial Digital Interface (I/O)
• DVI : Digital Visual Interface
• HDSDI: High Definition SDI
3.2.2 5-cable input (BNC1)
Where to find ?
Slot 1 has 5 BNC input terminals, located as shown on the image.
Image 3-1
R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002
3. Connections
15