Packaging And Dimensions; Box Content; Projector Packaging - Barco R9040171 Owner's Manual

1. PACKAGING AND DIMENSIONS

This chapter handles about the way the projector is packed and gives an overview of the dimensions.
•

Box content

•

Projector Packaging

• Lens Packaging
• Dimensions
1.1 Box content
CEE7
European power plug to connect the power cord to the wall outlet.
ANSI 73.11
American power plug to connect the power cord to the wall outlet.
Content
• 1 projector BARCOREALITY SIM6 ULTRA MM(weight ± 17 kg or 37.4 lbs)
• 1 remote control unit RCU + 2 batteries.
• 2 power cables with outlet plug type CEE7 and ANSI 73.11.
• 1 owners manual
• 1 safety manual
1.2 Projector Packaging
Way of Packaging
The projector is packed in a carton box. To provide protection during transportation, the projector is surrounded with foam. The
package is secured with banding and fastening clips.
To unpack
1. Release the fastening clips.
2. Remove the banding. Handle as shown in the drawing. (image 1-1)
3. Take the projector out of its shipping carton and place it on a table.
Image 1-1
Save the original shipping carton and packing material, they will be necessary if you ever have to ship your
projector. For maximum protection, repack your projector as it was originally packed at the factory.
Never transport the projector with the lens mounted on it !
Always remove the lens before transporting the projector.
R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002
1. Packaging and Dimensions
3