Advanced Settings; Noise Reduction; Dynamic Color Depth; Input Balance - Barco R9040171 Owner's Manual

7.8 Advanced settings

7.8.1

Noise reduction

How to change the Noise reduction ?
1. Press MENU to activate the Toolbar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select settings
5. Press → to pull down the menu
6. Use ↓ or ↑ to select Noise reduction
7. Press ENTER
On the screen appears now a sliderbox
8. Use ←or → , the numeric keys on the remote, or the keypad to change the Noise reduction setting.
7.8.2

Dynamic color depth

What can be done ?
By adapting Chrominance in relation to luminance, color contrast can be adapted.
How to change the Dynamic color depth ?
1. Press MENU to activate the Toolbar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select advanced settings
5. Press → to pull down the menu
6. Use ↓ or ↑ to select Dynamic color depth
7. Press ENTER
On the screen appears now a sliderbox
8. Use ←or → , the numeric keys on the remote, or the keypad to change the Dynamic color depth setting.

7.9 Input balance

This procedure is reserved to Barco authorized technicians only.

7.10 AGC on Video

AGC
Automatic Gain Control: allows an automatic amplitude (gain) control of the incoming video signal
R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002
7. Image Menu
51