Projector Address - Barco R9040171 Owner's Manual

11. Installation menu
Image 11-2
A vertical shift above 100% is not recomended in case of high resolution data signals.

11.2 Projector address

What can be done ?
In some cases the projector address must be changed, for example if an unique RCU is used to control 2 or more projectors.
The projector address setting on the projector must match the setting on the RCU.
What can be changed ?
Within the 'Change Projector Address' menu, the following items can be changed
• Projector address: address defined by the user, may be from 0 to 255
• Common address : address may be 0 or 1
How to change the projector's RC5 address ?
1. Press MENU to activate the Toolbar
2. Press → to select the Installation
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Projector address (image 11-4)
5. Press ENTER
A dialogbox appears on the screen. (image 11-5, image 11-6)
Image 11-4
Image 11-5
70
Image 11-3
Image 11-6
R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002