Rename File - Barco R9040171 Owner's Manual

10. Image files menu
Advanced Data settings
The advanced button enables the advanced settings for a data source.
Image 10-8
The VCO range setting determines the frequency range of the VCO (Voltage Controlled Oscillator).
The Cpmp (Charge pump current) sets the low pass filter current.
Both VCO range & Cpmp are set by the image file, changing these settings is only indicated in for special purposes.
The input format settings are used to "tell more" about the signals connected on the BNC's, it completes the information in the source
selection menu.
It is recommended to use the default values.

10.3 Rename file

How to rename a file ?
1. Press MENU to activate the Toolbar
2. Press → to select the Image files item
3. Press ↓ to Pull down the Image files menu
4. Use ↑ or ↓ to select Rename (image 10-9)
5. Press ENTER
A dialogbox is displayed (image 10-10)
6. Use ↑ or ↓ to select the desired file
7. Press ENTER
A textbox is displayed (image 10-11)
Use ←or →, ↓ or ↑ the numeric keys on the remote, or the keypad to edit and change the values, confirm with ENTER.
66 R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002