Lamp Runtime Warning - Barco SIM 5W User Manual

7. Advanced
How to clear the lamp error ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamps item
3. Press ↓ to Pull down the Lamps menu
4. Use ↑ or ↓ to select Clear lamp error
5. Press ENTER
A dialog box will be shown to confirm the lamp error removal. Confirm.
The lamp error logo is removed from the screen
7.7.8

Lamp runtime warning

What can be done ?
When the lamp has reached a predetermined runtime , a warning message will be displayed on the screen. The lamp runtime
warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp
lifetime. This warning message can be removed by hitting Back on the RCU.
How to set the lamp runtime warning ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamps item
3. Press ↓ to pull down the Lamps menu
4. Use ↑ or ↓ to select Runtime warning...
Image 7-140
5. Press ENTER
A dialog box is displayed
Image 7-141
6. Use ←or →, the numeric keys on the remote, or the keypad to change the runtime warning setting.
126
Downloaded From projector-manual.com Barco Manuals
When the Warning messages are disabled in the hidden Service menu, the lamp runtime warning will only be
displayed at the next startup of the projector, not during a session. Enabling or disabling TextBox does not
affect the display of the lamp runtime warning.
R59770324 SIM 5W 22/12/2011