Table of Contents
Advertisement
2. Installation Guidelines
Image 2-6
Note, only important if more than one projector is installed in the room.
The common address can be zero (0) or one (1). The standard RCU are setup for common address zero. To
change the common address of the RCU, contact a BARCO service center. If it is necessary to program the
projector address into the RCU, see chapter 'Getting Started'.
Projector address has to be reprogrammed every time the battery is changed, the RCU will always switch to
the default address.
R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002
13
Advertisement
Table of Contents
