Pip Remove Window - Barco R9040171 Owner's Manual

8. Tools Menu
How to add a window ?
1. Press MENU to activate the Toolbar
2. Press → to select the Tools item
3. Press ↓ to Pull down the Tools menu
4. Use ↑ or ↓ to select PiP add window (image 8-4)
5. Press ENTER
The source selection menu is displayed
In the lower part of the screen appears a wizard in 4 steps (image 8-5)
Image 8-4
Image 8-5

8.4 PiP remove window

How to remove a window ?
1. Press MENU to activate the Toolbar
2. Press → to select the Tools item
3. Press ↓ to Pull down the Tools menu
4. Use ↑ or ↓ to select PiP remove window (image 8-6)
5. Press ENTER
In the lower part of the screen appears a wizard. (image 8-7)
The selected window appears surrounded with a white frame, each hit on PiP ADJUST will move the frame along the different
windows.
Image 8-6
Image 8-7
56 R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002