Hdsdi Input; Communications; Rs232 In Connection - Barco R9040171 Owner's Manual

How to connect a SDI source ?
1. Connect the out of your SDI source to the BNC SDI input of the projector. (image 3-6)
Note: The input is always 75 ohm terminated.
2. If loop through is needed, use the SDO output to connect to next device.
Note: The output impedance of the SDO is 75 ohm.
Image 3-6
How to select slot 7
1. Key in 7on the RCU or the local keypad or use the menu
3.2.8

HDSDI input

What can be connected ?
This avoids the need for analog processing anywhere in the video production chain and guarantees the ultimate image quality. An
active loop through of the HDSDI input signal is provided for monitoring or for double or triple stacking applications.
How to connect a HDSDI source ?
1. Connect the out of your HDSDI source to the BNC HDSDI input of the projector. (image 3-7)
Note: The input is always 75 ohm terminated.
2. If loop through is needed, use the HDSDO output to connect to next device.
Note: The output impedance of the HDSDO is 75 ohm.
Image 3-7
3.2.9

Communications

3.2.9.1 RS232 IN connection

What can be connected to the RS232 IN connection ?
The RS 232 IN connections allows the projector to communicate with a Computer e.g. IBM PC or Apple Macintosh.
R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002
3. Connections
19