Runtime Warning - Barco iQ PRO G 500 Owner's Manual

10. Lamp Menu
Image 10-11
W
ARNING
technician.
How to reset the lamp runtime in the SIM5Plus?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Reset runtime
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the lamp to be reset
7. Press ENTER
A dialog box is displayed (image 10-12)
8. Use ←or →, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will
not be accepted).
Image 10-12
W
ARNING
technician.

10.6 Runtime warning

What can be done ?
When the lamp has reached a certain predetermined runtime , a warning message will be displayed on the screen. The lamp runtime
warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp
lifetime.
92
:
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
:
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
R5976491 IQ PRO G 350/500 19/09/2006