Table of Contents
Advertisement
Image 6-11
6.7 Reset runtime
When to reset the lamp runtime ?
The lamp runtime should only be reset when placing a new lamp.
How to reset the lamp runtime ?
1. Press MENU to activate the Toolbar
2. Press → to select the General item
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select Reset runtime
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the lamp to be reset (image 6-12)
7. Press ENTER
A dialogbox is displayed (image 6-13)
8. Use ←or →, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will
not be accepted).
Image 6-12
R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002
6. General Menu
39
Advertisement
Table of Contents
