Take Screenshot - Barco R9040171 Owner's Manual

How to enable/disable the Startup screen?
1. Press MENU to activate the Toolbar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Startup screen (image 11-13)
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired baudrate
7. Press ENTER
Image 11-13

11.10Take screenshot

What can be done ?
A screenshot can be taken from an active projected image. This screenshot is then saved in a RAM and can be used as background.
Each new screenshot erases the previous logo therefore a warning message is displayed asking the user to confirm.
How to take a screenshot ?
1. Press MENU to activate the Toolbar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Take screenshot (image 11-14)
5. Press ENTER
A dialogbox is displayed. Press yes to confirm. (image 11-15)
A textbox shows the evolution of the operation. (image 11-16, image 11-17)
Image 11-14
R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002
11. Installation menu
75