Table of Contents
Advertisement
PiP dedicated buttons
•
PiP Adjust : this button allows to focus on one particular window, this is shown with a white frame surrounding the selected
window.
A source identification box is displayed in the right lower corner.
Pressing the button removes the frame to the next window. This can also be done via PiP Adjust in the Tools menu
Image 8-3
•
PiP: this button allows to browse through the different configurations, it has the same function as PiP select in the Tools menu.
8.2 PiP select
How to change the PiP configuration ?
1. Press MENU to activate the Toolbar
2. Press → to select the Tools item
3. Press ↓ to Pull down the Tools menu
4. Use ↑ or ↓ to select PiP select
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the desired configuration
7. Press ENTER
A white bullet shows the active layout
The PiP configuration can also be selected via the dedicated PiP key on the RCU.
8.3 PiP add window
What can be done ?
It is possible to add a window to the existing windows, therefore a source must be selected.
Sources which are already used are unselectable. If for instance the PiP layout contains a component video then component video
will be unselectable.
Once added, the window may be altered in several ways to meet particular needs:
•
repositioning
•
resizing
•
changing the order
R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002
8. Tools Menu
55
Advertisement
Table of Contents
