Edit File - Barco R9040171 Owner's Manual

10. Image files menu
In PiP mode, the files which may be loaded will be of the data type if the active window is a data window, or
they will be of the video type if the active window is a video window.
What to do if the image is not perfect ?
If the displayed image is not correct after AutoImage or after selecting the best fitting file, go to the Edit menu, select the active file
and change the settings.

10.2 Edit file

What can be done with the Edit file menu ?
The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult
the source specifications before entering the data.
How to edit a file ?
1. Press MENU to activate the Toolbar
2. Press → to select the Image files item
3. Press ↓ to Pull down the Image files menu
4. Use ↑ or ↓ to select Edit (image 10-3)
5. Press ENTER
A dialogbox is displayed
6. Use ↑ or ↓ to select the desired file
Note: If in PiP mode, the cursor is placed by default on the active file which has the focus.
7. Press ENTER
A dialogbox is displayed (image 10-4)
8. Press ENTER
A dialogbox is displayed (image 10-5)
9. Use ←or →, the numeric keys on the remote, or the keypad to edit and change the values, confirm with ENTER
Note: greyed out fields can not be updated (total pixels)
Image 10-3
64
Image 10-4
R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002