Signal Menu; Switching Mode; Background - Barco R9040171 Owner's Manual

Barcoreality sim 6 ultra mm

Table of Contents

9. SIGNAL MENU

Overview

•

•

9.1 Switching mode

Switching from one source to another

To minimize undesired effects when switching from one source to another, one can use the Seamless switching mode, beside Seam-

less switching there is a wide choice of several effects which render the source switching transitions more enjoyable.

How to select a switching mode ?

1. Press MENU to activate the Toolbar

2. Press → to select the Signal item

3. Press ↓ to Pull down the Signal menu

4. Use ↑ or ↓ to select Switching mode

5. Press → to pull down the menu

6. Use ↑ or ↓ to select the desired switching mode (image 9-1)

7. Press ENTER

A white bullet shows the active effect.

The next source switching will be done using the selected effect

Image 9-1

9.2 Background

Purpose

If there is no signal connected to the projector, the background will be a logo, a black or a blue screen depending on the background

settings.

R5976495 BARCOREALITY SIM 6 ULTRA MM 22102002

9. Signal Menu

Table of Contents