Terminal Vs. Serimux Cable Connections; Connect Devices, Hosts, And Power; Figure 2- Distinction Of Connections Between Terminal And Serimux; Figure 3- Connect Serial Devices, Printer, And Power Cord - Network Technologies SERIMUX-TERM-CS-16/8 Installation And Operation Manual
Serimux series terminal converter with console switch
Table of Contents
Advertisement
NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
1.2 TERMINAL vs. SERIMUX Cable Connections
The connectors on the rear of the SERIMUX-TERM-CS-16 are split between those for the TERMINAL connections, and those for
the SERIMUX connections (see Figure 2).
NTI
NETWORK
R
TECHNOLOGIES
INCORPORATED
1275 Danner Dr
Tel:330-562-7070
Aurora, OH 44202
Fax:330-562-1999
ww w.networktechinc.com
Figure 2- Distinction of connections between TERMINAL and SERIMUX
1.3 Connect Devices, Hosts, and Power
1.
Connect each serial device (or host) to be connected by the SERIMUX to any port labeled "1" through "16" using a DTE
or DCE type serial cable. It may be necessary to add one of the cable adapters (supplied) detailed in "Cable Adapters"
(page 70) between the device port on the serial device (or host) and the RJ45 connector.
Note: There are two types of serial devices, 1) data communication equipment (DCE)(i.e. modem) and 2) data terminal
equipment (DTE) (i.e. CPU), each having different connector pin assignments. The cable adapters (see "Materials" on
page 3) make the proper connections.
2.
If connecting a printer, connect either a serial printer cable to the remaining male DB9 connector or a parallel printer
cable to the female DB25 connector (see Figure 3).
3.
Connect the powercord to the IEC power connector.
Attach local printer
either by parallel cable to "Parallel"
or by serial cable to "Serial"
IEC Power Connector
Powercord
Terminal Converter
(TERMINAL)
MONITOR
PRINTER
PARALLEL
SERIAL
16
15
14
13
12
11
10
9
Rear View of SERIMUX-TERM-CS-16
MONITOR
SERIAL
NTI
NETWORK
R
TECHNOLOGIES
INCORPORATED
1275 Danner Dr
Tel:330-562-7070
Aurora, OH 44202
Fax:330-562-1999
ww w.networktechinc.com
16
15
14
13
Figure 3- Connect serial devices, printer, and power cord
RESET
ISP
TERMINAL-
10 BASE T
8
7
6
5
4
3
2
1
Console Switch
(SERIMUX)
Rear View of SERIMUX-TERM-CS-16
PRINTER
PARALLEL
TERMINAL-
10 BASE T
12
11
9
8
7
5
10
6
RJ45
Male
Connector
ROUTER
Ethernet cable
FIREWALL
6
KEYBOARD
RESET
ISP
ETHERNET
KEYBOARD
4
3
2
1
PBX
SERVER
Advertisement
Table of Contents
