Table of Contents
Advertisement
NTI UNIMUX SINGLE-USER HIGH DENSITY VGA USB KVM SWITCH
Help Mode
To enter Help Mode press the <F1> key from the Command Mode
menu (see page 13).
Help Mode displays a list of commands with a short explanation of
their function. The following options allow the user to quickly
obtain information on any command
Function
View the previous page of help
if available
View the next page of help if available
Exit Help Mode
Scan Mode
Using Scan Mode, the user can automatically switch from one CPU to another in predetermined configurable time intervals. The
CPU ports to be scanned are easily selected provided the user has access to them. At initial startup, the user as access to all
CPU ports by default.
To activate or deactivate Scan Mode press <S> from the Command Mode menu. The text shown in the menu (see Figure 11) will
toggle between "Scan=N" and "Scan=Y", each time the <S> key is pressed. When "Scan=Y" is shown, Scan Mode is active.
When "Scan=N" is shown, Scan Mode is OFF.
From the Settings menu (see page 15) press <S> to access the "Scan List".
ports to be active in Scan Mode.
ports will be scanned in Scan Mode.
The "Scan List" is a check list with all the port numbers displayed
• unchecked box = the corresponding port is not in the scan list
• checked box
= the corresponding port is in the scan list
From the "Scan List" the user can:
• toggle the state of the selected port (press <Spacebar>)
• select all ports to be scanned (press <A>)
• deselect all ports so that none are scanned (press <N>)
• find a specific port to either select or deselect (press <F> ,
then any alphabetical or numeric character to locate the desired port).
A port is skipped from the scan cycle if one of the following conditions is true:
- the port is not in the Scan List
- Security Mode is enabled and the user does not have access rights to the port
- the CPU connected to the port is OFF
.
Keystroke
Page Up
Page Down
Esc
While active, the user will have full device control of the connected port.
17
Figure 15- Main Menu help screen
The Scan List enables the user to select specific
Figure 16- Scan List
Only the selected
Advertisement
Table of Contents
