Table of Contents
Advertisement
NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
Login user to a port and connect the user port to a host port
Action (from Keypad)
1.
Press USER
2.
Enter the user number
3.
Press PORT
4.
Enter the user port
number
5.
Press PORT again
6.
Enter the host port
number
7.
Press ENTER
The user will be connected if:
– the specified user is enabled, and is not logged in;
– the specified ports are accessible to the user;
– the user port is not otherwise already connected and the port type is "User".
– the host port is not otherwise already connected and the port type is "Host".
Disconnect and logout a user
Action (from Keypad)
1.
Press DISCON
2.
Press USER
3.
Enter the user number
4.
Press ENTER
Connect 2 host ports
Action (from Keypad)
1.
Press PORT
2.
Enter the first port number
3.
Press PORT again
4.
Enter the second port
number (to connect the
first port number to)
5.
Press ENTER
The two host ports will be connected if:
–
the ports are not connected
–
the ports type is "Host".
Reaction of SERIMUX
-
The LED "User" will illuminate.
-
The port 0 LED will be illuminated, the other port LEDs will be OFF.
-
The corresponding port LED will illuminate
-
The LED "Port" will illuminate
-
The corresponding port LED will illuminate. The other port LEDs will be OFF.
-
The LED "Port" will illuminate
-
The corresponding port LED will illuminate. The other port LEDs will be OFF.
-
The User main menu will be displayed on the terminal application on the user port: (see
Figure 22 on page 27 )
-
If command is successful the "Admin","Port","Discon".,"User" LEDs will illuminate together.
They will turn OFF after 30 seconds or when any other key is pressed.
Reaction of SERIMUX
-
The LED "Discon" will illuminate.
-
The LED "User" will illuminate.
-
The corresponding port LED will illuminate, the other port LEDs will be OFF
-
The LEDs "Port", "Admin", "User", and "Discon" will illuminate briefly.
Reaction of SERIMUX
-
The LED "Port" will illuminate.
-
The port 0 LED will be illuminated. The other port LEDs will be OFF.
-
The corresponding port LED will illuminate, the other port LEDs will be OFF
-
The LED "Port" will illuminate. The port 0 LED will be illuminated, the other port LEDs will be
OFF.
-
The corresponding port LED will illuminate. The other port LEDs will be OFF.
-
If command is successful the "Admin","Port","Discon".,"User" LEDs will illuminate together.
They will turn OFF after 30 seconds or when any other key is pressed.
35
Advertisement
Table of Contents
