Wireless Xdp Parallel Mode - Panasonic KX-NS1000 Operating Manual

1.3.77 Wireless XDP Parallel Mode

•
Whisper OHCA is only available with certain digital proprietary telephones and IP proprietary
telephones. In addition, both you and the other party must use supported telephones.
•
Whisper OHCA is not available for outside calls; only call waiting tone can be set (refer to
"1.3.13 Call Waiting Tone").
•
A PDN extension can only receive OHCA or Whisper OHCA from the corresponding SDN
extension. When a call is made from another extension, a PDN extension will receive a call
waiting tone. (® 1.3.50 PDN (Primary Directory Number)/SDN (Secondary Directory
Number) Extension)
•
For information about answering a waiting call, refer to "1.3.12 CALL WAITING
FEATURES".
1.3.77 Wireless XDP Parallel Mode
Your PS can be used in parallel with a PT, SLT, or SIP phone.
When in this mode, incoming calls to a wired telephone also ring the paired PS.
To set
PS
PS
Press TALK.
To cancel
PS PS
Press TALK.
•
Some wired telephones are prohibited from using this feature.
•
If you go off-hook while your paralleled telephone is in use, the call will switch over to
you (except SIP phones).
156 Operating Manual
4 8 1
48. Enter 1.
Enter
4 8 0
Enter 0.
Enter 48.
extension no.
C.Tone
Enter extension number
of the paired telephone.
C.Tone
Press CANCEL.
Press CANCEL.
Document Version 2013-04