Wireless Xdp Parallel Mode - Panasonic KX-TDA30 Features Manual

1.24.5 Wireless XDP Parallel Mode

Description
A PS can be used in parallel with a wired telephone (PT/SLT). In this case, the wired telephone is the main
telephone and the PS is the sub telephone. When Wireless XDP Parallel Mode is enabled, the two
telephones share one extension number (main telephone's extension number) like XDP Parallel mode for a
DPT and an SLT.
Super
Hybrid
Port
XDP Parallel Mode
DPT
Extn. 102
Conditions
• If one of the telephones goes off-hook while the other telephone is on a call, the call is switched to the
telephone going off-hook. However, the call is not switched in one of the following conditions:
a)
During a Conference call (→ 1.13.1 Conference Features).
b)
While Live Call Screening (LCS) or Two-way Record is activated (→ 1.23.3 Voice Mail DPT (Digital)
Integration).
c)
While receiving OHCA (→ 1.7.4.3 Off-hook Call Announcement (OHCA)).
d)
While being monitored by another extension (→ 1.7.3 Call Monitor).
e)
During Consultation Hold.
f)
During a broadcasting call (→ 1.15.1 Broadcasting).
(Consultation Hold: Allows an extension user to place a call on hold temporarily to perform Call
Transfer, Conference, or Call Splitting.)
• Wireless XDP Parallel Mode can only be set from a PS. The wired telephone can accept or deny this
feature through COS programming (→ Wireless XDP Parallel Mode for Paired Telephone [515]). Once
this feature is set, the setting at the wired telephone cannot be changed unless a PS changes the
setting.
• The following features are not available for extensions in Wireless XDP Parallel Mode while the PS is
on a call (however, they are available for the extensions in Wireless XDP Parallel Mode while the wired
telephone is on a call):
– Executive Busy Override
PBX
Wireless Phone
Cell Station
Wireless XDP
Parallel Mode
PS
PT/SLT
Extn. 103
1.24 Portable Station (PS) Features
Feature Guide 231