Pmc Module Installation; Figure 3-2. Pmc Module Placement On Mvme2700 - Motorola MVME2700 Series Installation And Use Manual

PMC Module Installation

PCI mezzanine card (PMC) modules mount beside the RAM200
mezzanine on top of the MVME2700 base board. To install a PMC
module, refer to
1. Attach an ESD strap to your wrist. Attach the other end of the ESD
2. Perform an operating system shutdown. Turn the AC or DC power
3. Carefully remove the MVME2700 from its VMEbus card slot and
4. Remove the PCI filler from the front panel.

Figure 3-2. PMC Module Placement on MVME2700

http://www.mcg.mot.com/literature
Figure 3-2 and proceed as follows:
strap to the chassis as a ground. The ESD strap must be secured to
your wrist and to ground throughout the procedure.
off and remove the AC cord or DC power lines from the system.
Remove chassis or system cover(s) as necessary for access to the
VMEmodules.
lay it flat, with connectors P1 and P2 facing you.
PMC Module Installation
11871.00 (2-3) 9710
3-5
3