Pmc Module Installation; Figure 1-18. Ram200 Placement On Mvme2603/2604 - Motorola MVME2600 series Installation And Use Manual

Figure 1-18. RAM200 Placement on MVME2603/2604

5. Insert the four short Phillips screws through the holes at the corners
6. Reinstall the MVME2603/2604 assembly in its proper card slot. Be
7. Replace the chassis or system cover(s), reconnect the system to the

PMC Module Installation

PCI mezzanine card (PMC) modules mount beside the RAM200
mezzanine on top of the MVME2603/2604 base board. To install a PMC
module, refer to
http://www.motorola.com/computer/literature
of the RAM200, into the standoffs on the MVME2603/2604.
Tighten the screws.
sure the module is well seated in the backplane connectors. Do not
damage or bend connector pins.
AC or DC power source, and turn the equipment power on.
Figure 1-19 and proceed as follows:
Hardware Installation
11661.00 9611 (2-3)
1-37
1