12 Technical Specifications; B4A−76 - Siemens CP 443-1 Manual

12 Technical Specifications

12 Technical Specifications
Table 6-1 Technical Specifications
Transmission rate
Interfaces
Attachment to Industrial Ethernet
Aging time (4-port switch)
C-PLUG (memory submodule)
Current consumption via the S7
backplane bus
from 5 V:
Current consumption for battery
backed RAM file system (/sram) from
battery of power supply module
Power loss
Permitted ambient conditions
S
Operating temperature
S
Transportation/storage
temperature
S
Relative humidity max.
S
Altitude
Design
Dimensions, module in casing H x W
x D (mm)
Weight
In addition to the specifications listed here, the "General Technical Specifications"
listed in the reference manual S7-400/M7-400 "Module Data" /1/ apply to the CP
443-1 Advanced.
S Electromagnetic compatibility
S Transportation and storage conditions
S Mechanical and climatic ambient conditions
S Insulation tests, class of protection and degree of protection
B4A−76
10 Mbps and 100 Mbps
Note:
To operate with PROFINET IO and PROFINET CBA, the
transmission rate of 100 Mbps full duplex is an absolute
necessity.
4 RJ-45 jacks
5 minutes
Number of write cycles: approx. 100 000
1.8 A maximum
0.018 mA typical
0.063 mA maximum
7.25 W
0 °C to +60 °C
−40 °C to +70 °C
95% at +25 °C
up to 2000 m above sea level
290 x 25 x 210
approx. 700 g
CP 443-1 Advanced for Industrial Ethernet / Manual Part B4A
Release 01/2007
C79000-G8976-C193-06