Table 6- 12 Fc 6 V24_Set Parameters - Siemens Simatic S7-300 CP 341 User Manual

Communication via Function Blocks
6.5 Using the System Function Blocks with the ASCII Driver
FC 6 V24_SET parameters
The following table lists the parameters of the FC 6 V24_SET.
Table 6- 12 FC 6 V24_SET parameters
Name Sort
LADDR INPUT
RTS INPUT
DTR INPUT
See also
Principle of the Data Transmission with the ASCII Driver (Page 62)
164
www.gkbpx.com
Data type Comment
INT CP 341 start address
BOOL Request to send,
CP 341 ready to send
BOOL Data terminal ready,
CP 341 ready for operation
CP 341 Point-to-Point Communication, Installation and Parameter Assignment
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
Permitted values, remark
The start address is taken from
STEP 7.
(Control CP 341 output)
(Control CP 341 output)
Manual, 09/2008, A5E02191071-01