Table of Contents
Advertisement
Permitting or Refusing the SSH Access to XSCF from Domain via
DSCP
Command operation
■
1. Use the showssh(8) command to display SSH settings.
XSCF> showssh
SSH status: enabled
SSH DSCP: accept
RSA key:
:
DSA key:
:
2. Use the setssh(8) command to permit or refuse the SSH access to XSCF from
domain via DSCP.
<Example 1> Permit SSH access.
XSCF> setssh -m dscp=accept
Continue? [y|n] :y
Please reset the XSCF by rebootxscf to apply the ssh settings.
<Example 2> Refuse SSH access.
XSCF> setssh -m dscp=deny
Continue? [y|n] :y
Please reset the XSCF by rebootxscf to apply the ssh settings.
3. To permit and refuse the SSH access, the XSCF reset is required. Use the
rebootxscf(8) command to reset the XSCF.
XSCF> rebootxscf
The XSCF will be reset. Continue? [y|n] :y
After the XSCF reset, the XSCF session is disconnected. Please log in again to the
■
XSCF.
Chapter 2
Setting Up XSCF 2-109
Advertisement
Table of Contents
