Table of Contents
Advertisement
3. Use the showldapssl(8) command to confirm the usermapmode status.
XSCF> showldapssl
usermapmode: enabled
state: enabled
strictcertmode: disabled
timeout: 4
logdetail: none
Configuring or Clearing the Usermap
■
1. Use the showldapssl(8) command to display the configuration of the usermap.
XSCF> showldapssl usermap
attributeInfo: (none)
binddn: (none)
bindpw: (none)
searchbase: (none)
2. Use the setldapssl(8) command to configure the usermap.
<Example1> Configures the attribute information.
XSCF> setldapssl usermap attributeInfo '(&(objectclass=
person)(uid=))'
<Example2> Configures the bind distinguished name.
XSCF> setldapssl usermap binddn CN=SuperAdmin,DC=aCompany,DC=com
<Example3> Configures the bind password.
XSCF> setldapssl usermap bindpw b.e9s#n
<Example4> Configures the search base.
XSCF> setldapssl usermap searchbase OU=yoshi,DC=aCompany,DC=com
3. Use the showldapssl(8) command to confirm the usermap.
XSCF> showldapssl usermap
attributeInfo: (&(objectclass=person)(uid=))
binddn: CN=SuperAdmin,DC=aCompany,DC=com
bindpw: Set
searchbase: OU=yoshi,DC=aCompany,DC=com
2-78
SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
Command operation
Advertisement
Table of Contents
