Fujitsu SPARC EnterpriseM3000 User Manual page 416

Note – In the M3000/M4000/M5000/M8000/M9000 servers, information has been
added, such as power consumption and exhaust air. If you install a new server,
reinstall the XSCF extension MIB definition file to the SNMP manager. For specific
information about power consumption and exhaust air, see the latest version of the
Product Notes (no earlier than the XCP 1080 edition) for your server.
The list below explains the group summary of the extension MIB supported by the
XSCF.
1. scfInfo group
2. scfState group
3. scfMonitorInfo group
4. scfSystemInfo group
5. scfDomainInfo group
6. scfXsbInfo group
7. scfLsbInfo group
8. scfBoardInfo group
9. scfCpuInfo group
10. scfMemoryInfo group
C-4 SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
This group provides general information pertaining to the XSCF.
This group provides overall status information known to the XSCF.
This group provides environmental information for a variety of components
within the system.
This group provides general System information and LED states.
This group provides information specific to all Domains known to the XSCF.
This group provides information specific to all XSBs known to the XSCF.
This group provides information specific to all LSBs.
This group provides information pertaining to specific board components
within a System.
This group provides information for all CPU Modules/Cores within the
System.
This group provides information for all Memory Modules within the System.