Fujitsu SPARC EnterpriseM3000 User Manual page 300

Table of Contents

Advertisement

XSCF Commands (Continued)
TABLE 5-1
Command
setupfru
showfru
testsb
addboard
deleteboard
moveboard
replacefru
addfru
deletefru
setdomainmode
showdomainmode
sendbreak
showresult
setlocale
showlocale
setaltitude
showaltitude
cfgdevice
console
showconsolepath
Description
Specifies the number of XSB partitions of the system board and sets the memory
mirror mode.
Displays the specified number of XSB partitions of the system board and the
memory mirror mode that is set.
Diagnoses the system board.
Adds a system board to a domain.
Deletes a system board from a domain. Alternatively, it reserves a delete to the
system board. If the deletion is reserved, the deletion is done after Oracle Solaris OS
reboot.
Moves a system board to another domain. Alternatively, it reserves a move to the
system board. If the movement is reserved, the deletion is done after Oracle Solaris
OS reboot of source domain, and the assignment to the new domain is done.
Replaces a CPU/Memory Board unit, I/O unit, fan unit, PSU, or XSCF Unit in work
performed according to the applicable guide.
Installs a CPU/Memory Board unit, I/O unit, fan unit, or PSU in work performed
according to the applicable guide.
Removes a CPU/Memory Board unit or I/O unit in work performed according to
the applicable guide.
Sets a hardware initial diagnostic level (No, standard, maximum).
Enables or disables break signal sending, host watchdog, automatic boot, and sets
CPU operation mode.
Displays the domain host ID, the hardware initial diagnostic level, information of
enabled or disabled status on break signal sending, Host watchdog, automatic boot,
and displays CPU operation mode, ethernet address (mac address).
Sends a break signal to the server.
Displays the exit status of the most recently executed command.
Sets locale.
Displays locale.
Sets altitude.
Displays altitude.
Sets the connection destination of the DVD drive unit and tape drive unit. Displays
the setting status information.
Connects to a domain console.
Displays the operating status of the main console.
Chapter 5
Overview of the XSCF Shell
5-5

Advertisement

Table of Contents
loading

Table of Contents