Table of Contents
Advertisement
2. Use the setdomainmode(8) command to change the initial hardware diagnostic
level.
<Example> Specify the maximum initial hardware diagnostic level for domain ID 0.
XSCF> setdomainmode -d 0 -m diag=max
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
The specified modes will be changed.
Continue? [y|n]:y
configured.
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
3. Use the showdomainmode(8) command to confirm the initial hardware
diagnostic level.
<Example> Display the initial hardware diagnostic levels of domain
ID 0.
XSCF> showdomainmode -d 0
Host-ID
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
Enabling or Disabling the Host Watchdog Function and the Break Signal
Suppression
■
1. Use the showdomainmode(8) command to display the host watchdog and break
signal suppression setting.
<Example> Display the setting for domain ID 0.
XSCF> showdomainmode -d 0
Host-ID
Diagnostic Level
Secure Mode
Autoboot
CPU Mode
2-186
SPARC Enterprise Mx000 Servers XSCF User's Guide • January 2012
:min
-> max
:off
-> -
:on
-> -
:auto
-> -
:max
:off (host watchdog: unavailable
:on (autoboot:on)
:auto
:0f010f10
:max
:off
:on
:auto
Command operation
:0f010f10
:max
:off
:on
:auto
Break-signal:receive)
Advertisement
Table of Contents
